ICE MAKER REPAIR SALT LAKE CITY, UT

Ice Maker Repair Salt Lake City | Built for Utah's Hard Water

Wasatch Appliance Repair provides ice maker repair Salt Lake City homeowners rely on when the ice stops coming, water starts leaking, or the machine turns noisy. Our technicians diagnose the real problem and give you a clear quote before any work begins.

Quick Answer

What Our Ice Maker Repair Service Includes

Ice makers run quietly in the background until something breaks, and by the time you notice, the problem has usually been building for a while. Every service call starts with a full diagnosis, not a guess.

Refrigerator Ice Makers

The most common call we get.

Water Inlet Valve

Replacement when the valve fails or clogs.

Supply & Drain Lines

Water supply line and drain line repair.

Control Board & Thermostat

Diagnosis and replacement.

Ejector Arm & Motor

Repair of the ice-release mechanism.

Leak & Noise Diagnosis

Including compressor and motor issues.
If your model is not listed here, call anyway. We repair most major brands. Call (702) 827-7838 for same day scheduling.

What's Usually Wrong

Why Is My Ice Maker Not Making Ice

No ice production is the most common complaint we hear. Three parts are usually responsible. The water inlet valve controls the flow of water into the unit, and a faulty valve stops production before it starts. A clogged water filter restricts flow enough to shut production down entirely. The control board or thermostat can also fail, cutting power to the parts that make ice. Our technicians test each part in order, so you only pay to replace the one that actually failed.

Ice Maker Leaking Water

A leaking ice maker usually traces back to one of a few sources. Water often escapes through a cracked or loose supply line before it ever reaches the unit. A damaged water inlet valve can leak even while the machine sits idle. Sometimes ice buildup inside the machine melts and overflows the tray, especially when the evaporator has frozen over from a separate issue. Drain lines that become blocked can also send water where it should not go.

Ice Maker Making Loud Noise

A grinding, buzzing, or clicking sound during production is not something to ignore. A worn ice maker motor or ejector arm often creates a grinding noise as it struggles to release ice. Compressors that are starting to fail tend to hum or buzz louder than normal, especially as they age. Ice trapped in the mechanism sometimes causes a repeated clicking sound as the unit tries and fails to cycle.

Small, Misshapen, or Slow Ice Production

Sometimes the ice maker still runs, but the results are not right. Low water pressure often produces smaller or oddly shaped cubes. A partially frozen evaporator can slow production to a crawl. Both issues point to problems upstream of the ice tray itself, and diagnosing the true cause prevents a repeat visit.

Dealing with a leak or a dead ice maker? Call (702) 827-7838 for same day scheduling.

What the Technician Checks

Water Supply

Water inlet valve, supply line, water filter, and the drain line that carries melt away.

Ice-Making Mechanism

Ejector arm, ice maker motor, and the mold or tray where cubes form and release.

Controls & Cooling

Control board, thermostat, and the evaporator or compressor when cooling is the root cause.

We test each part in order, so you only pay to replace the one that actually failed.

Ice Maker Brands We Repair

Every brand engineers its water valve, mold, and control board differently. Knowing those differences means fewer repeat visits.

Samsung / LG

Digital control modules and inlet valve failures that need manufacturer-specific diagnosis.

Whirlpool / KitchenAid

Common ejector arm and motor module wear, plus inlet valve clogging in hard water areas.

GE / Frigidaire

Control board faults and thermostat issues on both side-by-side and French door units.

Sub-Zero / Viking

Built-in and high-end units that need sealed system and precise water line expertise.

We also repair Maytag, Bosch, and most other residential ice makers. Call us even if your brand is not listed here.
LOCAL WATER CHEMISTRY

Why Salt Lake City Hard Water Kills Ice Makers Faster

Salt Lake City water runs between 140 and 320 PPM of dissolved minerals, well into the very hard range. That mineral load clogs the water inlet valve and filter faster than the manufacturer’s schedule assumes, produces cloudy ice, and slows production. Regular filter changes and knowing the difference between a scaled-up part and a failed one saves you money.

Why Salt Lake City Homeowners Choose Wasatch Appliance Repair

You Get the Price Before We Start

The technician checks your appliance, explains the problem in plain words, and gives you one clear number. That number does not change after you approve it.

Same Day and Next Day Scheduling

Some appliance problems cannot wait a week. We offer same day and next day appointments across the valley. Call earlier for the best shot at a same day slot.

Emergency and After Hours Availability

Some breakdowns happen at the worst possible time. We work to get a technician to you as fast as possible when you need emergency service.

Licensed, Insured, and Background Checked

Every technician carries proper licensing and full insurance. Background checks are completed before anyone gets dispatched. You always know who is at your door.

30 Day Parts and Labor Warranty

Same issue comes back within 30 days? We return and fix it at zero extra cost. That warranty covers both parts and labor on every single job.

One Company for Every Appliance

The one appliance is rarely your only problem. Our technicians also handle refrigerators, washers, dryers, ovens, dishwashers, disposals, ice makers, and more. One call handles it all.

How Our Process Works

Six steps, start to finish u2014 no surprises along the way.
01
Call or request a quote. Tell us what the ice maker is doing and where you are located.
02
We schedule fast u2014 same day or next day in most cases, with a real arrival window.
03
Our technician diagnoses the issue and explains the root cause in plain terms.
04
You receive an upfront quote. Price comes before any parts are touched.
05
We complete the repair and test the ice maker through a full cycle before leaving.
06
Your repair is covered by a 30 day parts and labor warranty.

Repair or Replace: How to Decide

Not every ice maker is worth repairing. A worn water inlet valve or a clogged filter is almost always worth fixing, since both are quick and affordable. Compressor failure on an older unit tells a different story, since replacing that part can approach the cost of a new appliance. Our technician gives you an honest recommendation once the diagnosis is complete.
Valve / filter
Quick, affordable u2014 almost always worth it
Compressor
Higher cost u2014 weigh against unit age
6 months
Recommended water filter change interval
FOR BUSINESSES

Commercial Ice Machine Service Salt Lake City Businesses Rely On

Restaurants, cafes, and offices lose service the moment an ice machine goes down. Most commercial units benefit from professional cleaning and inspection every six months, though water quality and daily usage can shift that schedule. Call us to confirm whether your unit falls within our service scope.

A Word About Pricing and Trust

Calling a repair company for the first time feels risky, especially with water involved. Nobody wants a quick patch that leaks again in a month. Diagnosis happens first, the quote comes second, and nothing gets repaired until you approve the price. That order never changes, and it is how we keep repairs affordable and honest.
Have questions before you commit? Call (702) 827-7838 and talk to a real person, not a script.

Areas We Serve

Wasatch Appliance Repair serves Salt Lake City homeowners plus the surrounding valley. Searching for appliance repair near me? If you live in any of these communities, our technicians are already close by and ready to help.

Frequently Asked Questions

Every repair is different, so we do not publish a flat price. Our technician inspects the unit and gives you a clear quote before any work begins.
A faulty water inlet valve, a clogged water filter, or a failed control board are the most common causes.
A cracked supply line, a damaged inlet valve, a blocked drain line, or ice melting from a frozen evaporator are the usual sources.
Grinding often points to the ejector arm or motor. Buzzing or humming can mean the compressor is struggling.
It depends on the age of the unit and the part that failed. A valve or filter issue is usually worth repairing.
Most commercial units benefit from professional cleaning and inspection every six months.
In most cases, yes. Call early in the day for the best chance at a same day slot.
We charge a diagnostic fee to inspect and quote. Approve the repair, and that fee applies toward your total.
Yes. Every technician we send to your home is licensed, insured, and background checked before dispatch.
Whirlpool, Samsung, LG, GE, Maytag, Frigidaire, KitchenAid, Bosch, Sub Zero, and Viking.

Book Ice Maker Repair Salt Lake City Today

Fresh ice on demand, without the leaks or the noise. Our team is ready to diagnose the issue, give you an honest quote, and get your ice maker running the way it should.